a:6:{s:1:"k";s:46:"categories-v1-a3261f3375e773fbc76a3759279a6aca";s:1:"d";a:15:{i:0;a:17:{s:14:"products_model";s:11:"1663LDR_1/1";s:13:"products_name";s:66:"LDR outdoor light sensor 1m with control line for JT-KS with cable";s:17:"products_quantity";i:384;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"382_0.jpg";s:15:"products_weight";s:5:"0.040";s:26:"products_short_description";s:246:"LDR outdoor light sensor as an optional accessory with cable lengths of 1 - 8 m for JOSTechnik damper actuators if these are installed indoors.
Cannot be used for PDO, JT-HK until 12/2019 or KS-SFH!";s:20:"products_description";s:3635:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 1m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
De buitenlichtsensor LDR als optioneel accessoire is nodig als het apparaat binnenshuis wordt gemonteerd. In dit geval wordt de buitenlichtsensor buiten het gebouw gemonteerd en via de besturingskabel met het apparaat verbonden. Kabellengte 1 m Compatibel met PSD..., PHB2... en HK+HK-ZSU vanaf 2020 ! Niet geschikt voor JT-HK tot 12/2019 !
Czujnik światła zewnętrznego LDR jako wyposażenie dodatkowe jest wymagany w przypadku montażu urządzenia wewnątrz pomieszczeń. W tym przypadku czujnik światła zewnętrznego jest montowany na zewnątrz budynku i podłączany do urządzenia za pomocą kabla sterującego. Długość kabla 1 m Kompatybilny z PSD..., PHB2... i HK+HK-ZSU od 2020 roku! Nie dotyczy JT-HK do 12/2019!
La sonde de luminosité extérieure LDR en tant qu'accessoire optionnel est nécessaire si l'appareil est monté à l'intérieur. Dans ce cas, la sonde de luminosité extérieure est montée à l'extérieur du bâtiment et reliée à l'appareil par le câble de commande. Longueur de câble 1 m Compatible avec PSD..., PHB2... et HK+HK-ZSU à partir de 2020 ! Non applicable pour JT-HK jusqu'au 12/2019 !
Il sensore di luce esterna LDR come accessorio opzionale è necessario se il dispositivo è montato all'interno. In questo caso, il sensore di luce esterno viene montato all'esterno dell'edificio e collegato all'unità tramite il cavo di comando. Lunghezza cavo 1 m Compatibile con PSD..., PHB2... e HK+HK-ZSU dal 2020! Non applicabile per JT-HK fino al 12/2019 !
Senzor venkovního osvětlení LDR jako volitelné příslušenství je vyžadován, pokud je zařízení instalováno uvnitř. Čidlo vnějšího světla je instalováno mimo budovu a připojeno k zařízení pomocí ovládacího kabelu. Délka kabelu 1 m Kompatibilní pro PSD ..., PHB2 ... a HK + HK-ZSU od roku 2020! Nelze použít pro JT-HK do 12/2019!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:382;s:14:"products_price";s:7:"14.2857";s:22:"products_master_status";i:1;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:1;a:17:{s:14:"products_model";s:11:"1663LDR_1/2";s:13:"products_name";s:66:"LDR outdoor light sensor 2m with control line for JT-KS with cable";s:17:"products_quantity";i:403;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"383_0.jpg";s:15:"products_weight";s:5:"0.073";s:26:"products_short_description";s:354:"Outside light sensor LDR as an optional accessory for flap controller JT - KS until 03/31/2017; HK + HK-ZSU, HK2, PSD... and PHB2..... from 2020!
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK + HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
";s:20:"products_description";s:591:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 2m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:383;s:14:"products_price";s:7:"15.1261";s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:2;a:17:{s:14:"products_model";s:11:"1663LDR_1/3";s:13:"products_name";s:56:"LDR outdoor light sensor 3m with control line with cable";s:17:"products_quantity";i:748;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"384_0.jpg";s:15:"products_weight";s:5:"0.105";s:26:"products_short_description";s:131:"....required for the indoor installation of the gate control unit (JT-KS). Individual cable lengths are available!";s:20:"products_description";s:527:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 3m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:384;s:14:"products_price";s:7:"15.9664";s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:3;a:17:{s:14:"products_model";s:11:"1663LDR_1/4";s:13:"products_name";s:66:"LDR outdoor light sensor 4m with control line for JT-KS with cable";s:17:"products_quantity";i:877;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"385_0.jpg";s:15:"products_weight";s:5:"0.137";s:26:"products_short_description";s:357:"Outside light sensor LDR as an optional accessory for flap controller JT - KS until 03/31/2017; HK + HK-ZSU, HK2, PSD... and PHB2..... from 2020!
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK + HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
";s:20:"products_description";s:618:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 4m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:385;s:14:"products_price";s:7:"16.8067";s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:4;a:17:{s:14:"products_model";s:11:"1663LDR_1/5";s:13:"products_name";s:66:"LDR outdoor light sensor 5m with control line for JT-KS with cable";s:17:"products_quantity";i:881;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"386_0.jpg";s:15:"products_weight";s:5:"0.170";s:26:"products_short_description";s:354:"Outside light sensor LDR as an optional accessory for flap controller JT - KS until 03/31/2017; HK + HK-ZSU, HK2, PSD... and PHB2..... from 2020!
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK + HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
";s:20:"products_description";s:618:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 5m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:386;s:14:"products_price";s:7:"17.6471";s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:5;a:17:{s:14:"products_model";s:11:"1663LDR_1/6";s:13:"products_name";s:66:"LDR outdoor light sensor 6m with control line for JT-KS with cable";s:17:"products_quantity";i:966;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"387_0.jpg";s:15:"products_weight";s:5:"0.208";s:26:"products_short_description";s:354:"Outside light sensor LDR as an optional accessory for flap controller JT - KS until 03/31/2017; HK + HK-ZSU, HK2, PSD... and PHB2..... from 2020!
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK + HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
";s:20:"products_description";s:619:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 6 m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:387;s:14:"products_price";s:7:"18.4874";s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:6;a:17:{s:14:"products_model";s:11:"1667LDR_1/7";s:13:"products_name";s:66:"LDR outdoor light sensor 7m with control line for JT-KS with cable";s:17:"products_quantity";i:990;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"388_0.jpg";s:15:"products_weight";s:5:"0.237";s:26:"products_short_description";s:131:"....required for the indoor installation of the gate control unit (JT-KS). Individual cable lengths are available!";s:20:"products_description";s:618:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 7m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:388;s:14:"products_price";s:7:"20.1681";s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:7;a:17:{s:14:"products_model";s:11:"1667LDR_1/8";s:13:"products_name";s:66:"LDR outdoor light sensor 8m with control line for JT-KS with cable";s:17:"products_quantity";i:910;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"389_0.jpg";s:15:"products_weight";s:5:"0.265";s:26:"products_short_description";s:354:"Outside light sensor LDR as an optional accessory for flap controller JT - KS until 03/31/2017; HK + HK-ZSU, HK2, PSD... and PHB2..... from 2020!
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK + HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
";s:20:"products_description";s:618:"JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 8m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:389;s:14:"products_price";s:7:"21.0084";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047835477";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:8;a:17:{s:14:"products_model";s:8:"HK2.0-RH";s:13:"products_name";s:101:"HK2.0-RH - frame unit with self-locking chicken flap, incl. control for attraction light and lighting";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"489_0.jpg";s:15:"products_weight";s:5:"1.520";s:26:"products_short_description";s:576:"
- Mains operation 230 V / 12 V DC
- Light sensor
- menu-driven display
- self-locking flap 230x340mm for chickens
- fixed frame
- emergency stop and emergency opening
- control attraction light
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attraction light
- optional accessories: remote control for light and flap, external push-button, remote display, light sensor
";s:20:"products_description";s:4216:"automatic chicken flap HK2-RH in fixed frame with flap 230x340mm
automatically opens and closes a self-locking flap in a fixed frame at the poultry and hen house, aviary or small animal enclosure at dusk and / or at night.
If there is an animal under the slider during the closing process, the motor is automatically stopped and the flap is immediately reopened. The closing process is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap, as is usual with all other manufacturers!
integrated Lure light and lighting circuit
Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device. The Lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display. After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically. The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the stable on and off manually.
Self-locking
When closed, the flap in the fixed frame is automatically locked by a bolt on the back of the unit.
No predators such as martens, raccoons etc. can push up this flap when closed.
When the flap is opened, it is automatically unlocked again.
Further options:
- Connection for external pushbuttons available ( for manual OPEN and CLOSE ) If you install the HK2-RH indoors, you will need an outdoor light sensor. Can be ordered in the online shop of JOSTechnik!
- The flap is locked when closed and automatically unlocked again when opened. No predator like marten or raccoon can lift or open this flap when closed. The following functions can be set on the integrated display:
- Opening time for morning. The flap opens when it is light and the set opening time has been reached. Both conditions must apply.
- Closing time delay for evening. The flap is closed when it becomes dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
With the optional (additional) FB radio remote control you can operate the HK2 manually and/or switch the lighting on and off with the FB-4T radio remote control.
Mounting:
Fix the HK2-RH to the wall above the opening hole using the 4 screws supplied >>> READY !
Scope of delivery without flap/slide:
- automatic chicken flap HK2-RH with light sensor and menu-driven display as timer module, cord and flap 230x340mm Dimensions: width fixed frame 260 mm, length 570 mm, height 65 mm
- Plug-in power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 226
- Fastening material 4 screws and dowels each
Please pay attention to the note on your invoice to download the operating instructions!
";s:19:"products_extra_text";s:1055:"
- Productspecificaties automatische kippendeur PSD-RH
- Specyfikacje produktów automatyczne drzwi kurnika PSD-RH
- Spécifications du produit le volet automatique pour-volailles PSD-RH
- Descrizione del prodotto PSD-RH
- Popis produktu PSD-RH
";s:11:"products_id";i:489;s:14:"products_price";s:8:"121.0084";s:22:"products_master_status";i:1;s:12:"products_ean";s:12:"740972162985";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:9;a:17:{s:14:"products_model";s:8:"HK2.0-RE";s:13:"products_name";s:98:"HK2.0-RE - Frame unit with self-locking duck flap, incl. control for attracting light and lighting";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"500_0.jpg";s:15:"products_weight";s:5:"1.950";s:26:"products_short_description";s:545:"
- Mains operation 230 V / 12 V DC
- Light sensor
- menu-driven display
- self-locking flap 300x450mm for chickens
- fixed frame
- emergency stop and emergency opening
- control attraction light
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attraction light
- optional accessories: remote control for light and flap, external push-button, remote display, light sensor
";s:20:"products_description";s:4214:"automatic ducks flap HK2-RE in fixed frame with flap 300x450mm
automatically opens and closes a self-locking flap in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
If there is an animal under the slider during the closing process, the motor is automatically stopped and the flap is immediately reopened. The closing process is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap, as is usual with all other manufacturers!
integrated Lure light and lighting circuit
Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device. The Lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display. After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically. The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the stable on and off manually.
Self-locking
When closed, the flap in the fixed frame is automatically locked by a bolt on the back of the unit.
No predators such as martens, raccoons etc. can push up this flap when closed.
When the flap is opened, it is automatically unlocked again.
Further options:
- Connection for external pushbuttons available ( for manual OPEN and CLOSE ) If you install the HK2-RE indoors, you will need an outdoor light sensor. Can be ordered in the online shop of JOSTechnik!
- The flap is locked when closed and automatically unlocked again when opened. No predator like marten or raccoon can lift or open this flap when closed. The following functions can be set on the integrated display:
- Opening time for morning. The flap opens when it is light and the set opening time has been reached. Both conditions must apply.
- Closing time delay for evening. The flap is closed when it becomes dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
With the optional (additional) FB radio remote control you can operate the HK2 manually and/or switch the lighting on and off with the FB-4T radio remote control.
Mounting:
Fix the HK2-RE to the wall above the opening hole using the 4 screws supplied >>> READY !
Scope of delivery without flap/slide:
- automatic ducks flap HK2-RE with light sensor and menu-driven display as timer module, cord and flap 300x450mm Dimensions: width fixed frame 330 mm, length 680 mm, height 65 mm
- Plug-in power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 226
- Fastening material 4 screws and dowels each
Please pay attention to the note on your invoice to download the operating instructions!
";s:19:"products_extra_text";s:1055:"
- Productspecificaties automatische kippendeur PSD-RH
- Specyfikacje produktów automatyczne drzwi kurnika PSD-RH
- Spécifications du produit le volet automatique pour-volailles PSD-RH
- Descrizione del prodotto PSD-RH
- Popis produktu PSD-RH
";s:11:"products_id";i:500;s:14:"products_price";s:8:"142.0168";s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0054047835545";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:10;a:17:{s:14:"products_model";s:8:"HK2.0-RB";s:13:"products_name";s:107:"HK2.0-RB - Frame device with self-locking BIO chicken flap, incl. control for attracting light and lighting";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"502_0.jpg";s:15:"products_weight";s:5:"2.100";s:26:"products_short_description";s:565:"
- Mains operation 230 V / 12 V DC
- light sensor
- menu-driven display
- self-locking flap 420x370mm for chickens
- solid frame
- emergency stop and emergency opening
- Bait light control
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attracting light
- optional accessories: remote control for light and flap, external button, remote display, light sensor
";s:20:"products_description";s:4306:"automatic chicken flap HK2-RB in fixed frame with BIO-flap 230x340mm
automatically opens and closes a self-locking flap 420x370 mm for BIO posture in a fixed frame at the poultry and chicken house, aviary or small animal enclosure at dusk and / or at night.
It is planned to protect the HK2-RB as a single and frame unit within the scope of a patent application.
If there is an animal under the slider during the closing process, the motor is automatically stopped and the flap is immediately reopened. The closing process is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap, as is usual with all other manufacturers!
integrated Lure light and lighting circuit
Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device. The Lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display. After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically. The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the stable on and off manually.
Self-locking
When closed, the flap in the fixed frame is automatically locked by a bolt on the back of the unit.
No predators such as martens, raccoons etc. can push up this flap when closed.
When the flap is opened, it is automatically unlocked again.
Further options:
- Connection for external pushbuttons available ( for manual OPEN and CLOSE ) If you install the HK2-RB indoors, you will need an outdoor light sensor. Can be ordered in the online shop of JOSTechnik!
- The flap is locked when closed and automatically unlocked again when opened. No predator like marten or raccoon can lift or open this flap when closed. The following functions can be set on the integrated display:
- Opening time for morning. The flap opens when it is light and the set opening time has been reached. Both conditions must apply.
- Closing time delay for evening. The flap is closed when it becomes dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
With the optional (additional) FB radio remote control you can operate the HK2 manually and/or switch the lighting on and off with the FB-4T radio remote control.
Mounting:
Fix the HK2-RH to the wall above the opening hole using the 4 screws supplied >>> READY !
Scope of delivery without flap/slide:
- automatic chicken flap HK2-RB with light sensor and menu-driven display as timer module, cord and flap 420x370mm ( heigh x width ) Dimensions: width fixed frame 450 mm, length 570 mm, height 65 mm
- Plug-in power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 226
- Fastening material 4 screws and dowels each
Please pay attention to the note on your invoice to download the operating instructions!
";s:19:"products_extra_text";s:1055:"
- Productspecificaties automatische kippendeur PSD-RH
- Specyfikacje produktów automatyczne drzwi kurnika PSD-RH
- Spécifications du produit le volet automatique pour-volailles PSD-RH
- Descrizione del prodotto PSD-RH
- Popis produktu PSD-RH
";s:11:"products_id";i:502;s:14:"products_price";s:8:"147.0588";s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0054047835569";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:11;a:17:{s:14:"products_model";s:6:"HK2-AE";s:13:"products_name";s:90:"automatic chicken flap HK2 with plug-in power supply 12V + timer, control attraction light";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"530_0.jpg";s:15:"products_weight";s:5:"0.750";s:26:"products_short_description";s:453:"
- Separate control and drive unit
- Emergency stop and emergency opening
- Control of attraction light
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attraction light
- optional accessories: remote control for light and flap, external push-button, remote display, light sensor
";s:20:"products_description";s:4308:"Automatic chicken flap HK2AE with timer, light sensor and control system Attraction light ( without flap/pushers ) Control and drive unit separate
also called a hen house flap gate or electronic door opener / closer ( Automatic Hen House Door Opener / Closer ) automatically opens and closes flap gates or other optionally available vertical sliding gates using a cable pull on the poultry or hen house, aviary, or small animal enclosure via a dimmer switch.
The drive unit in its own housing is connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
Emergency stop or emergency opening function
Should an animal be under the slider during the closing process, the motor of the automatic chicken flap JT-HK is automatically stopped when it is put on. The emergency stop closing process is repeated 2 more times automatically. On the fourth closing attempt, the emergency stop function is deactivated. No animal has to free itself under the resting load of the flap, as is common with all other manufacturers.
Integrated lure light and lighting circuit Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device.
The lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display.
After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically.
The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the barn on and off manually.
Further options:
- Connection for external push-buttons available
- Connection for external remote indication available
- Connection for external light control available
If you assembly the HK2 indoors, your require an outdoor light sensor.
With our optionally available menu-driven electronic clock timer, the following functions can be set.
- HK2AE opens or closes only with the clock timer, the light sensor is idle
- HK2AE opens or closes only via light sensor, clock timer is idle
- HK2AE opens or closes with the clock timer and light sensor
- HK2AE opens or closes with the clock timer or light sensor
With the optionally available FB radio remote control, you can manually control the HK2AE.
Mounting:
Connection to plug-in power supply 230V / 12 V DC. The drive unit of the HK2AE should be mounted so that the internal cord is pulled straight out of the drive unit. Avoid diagonal pull! Control unit can be mounted anywhere. When open, the slider or the flap must be fastened by means of a connecting cord (not included in the scope of delivery) to the fastening point (aluminium nut), which is located on the underside of the housing of the drive unit when delivered. ( see installation )
The cord (cable pull) of the slider or the flap can be guided over cable or pulleys, therefore the mounting of the HK2AE is variable. (see mounting examples).
Scope of delivery without flap/slider, connecting cord and fixing material:
- automatic chicken flap HK2AE - control unit with menu-guided timer, incl. control for attraction light and lighting circuit Dimensions: width 120 mm, length 120 mm, height 55 mm + drive unit in its own housing with motor and wound-up pull cord with fastening nut,
- 230 V / 12 V DC plug-in power supply (approved for indoor use!), Ordernumber: 226
Not an assembly kit, no handicraft work, but a unit that is immediately ready for use!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:530;s:14:"products_price";s:8:"121.0084";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836313";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:12;a:17:{s:14:"products_model";s:8:"HK2AE-RH";s:13:"products_name";s:96:"HK2AE-RH - Frame unit with self-locking chicken flap, including control for baiting and lighting";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"531_0.jpg";s:15:"products_weight";s:5:"1.750";s:26:"products_short_description";s:607:"
- separate drive and control unit
- Mains operation 230 V / 12 V DC
- light sensor
- menu-driven display
- self-locking flap 230x340mm for chickens
- solid frame
- emergency stop and emergency opening
- Bait light control
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attracting light
- optional accessories: remote control for light and flap, external button, remote display, light sensor
";s:20:"products_description";s:4848:"automatic chicken flap HK2AE-RH in fixed frame with flap 230x340mm
automatically opens and closes a self-locking flap in a fixed frame at the poultry and hen house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
If there is an animal under the slider during the closing process, the motor is automatically stopped and the flap is immediately reopened. The closing process is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap, as is usual with all other manufacturers!
integrated Lure light and lighting circuit
Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device. The Lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display. After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically. The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the stable on and off manually.
Self-locking
When closed, the flap in the fixed frame is automatically locked by a bolt on the back of the unit.
No predators such as martens, raccoons etc. can push up this flap when closed.
When the flap is opened, it is automatically unlocked again.
Further options:
- Connection for external pushbuttons available ( for manual OPEN and CLOSE ) If you install the HK2AE-RH indoors, you will need an outdoor light sensor. Can be ordered in the online shop of JOSTechnik!
- The flap is locked when closed and automatically unlocked again when opened. No predator like marten or raccoon can lift or open this flap when closed. The following functions can be set on the integrated display:
- Opening time for morning. The flap opens when it is light and the set opening time has been reached. Both conditions must apply.
- Closing time delay for evening. The flap is closed when it becomes dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
With the optional (additional) FB radio remote control you can operate the HK2 manually and/or switch the lighting on and off with the FB-4T radio remote control.
Mounting:
Fix the HK2AE-RH to the wall above the opening hole using the 4 screws supplied >>> READY !
The control unit can be mounted at any location (fasteners not included) and must be connected to the drive unit on the fixed frame with a 7-core cable (not included, but can be ordered from JOSTechnik).
Scope of delivery without flap/slide:
- automatic chicken flap HK2AE-RH with light sensor and menu-driven display as timer module, cord and flap 230x340mm Dimensions: width fixed frame 260 mm, length 570 mm
+ Control unit ( dimension: 120 x 120 x 55 mm ) without 7-core connection cable ( can be ordered optionally from JOSTechnik )
- Plug-in power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 226
- Fastening material 4 screws and dowels each
Please pay attention to the note on your invoice to download the operating instructions!
";s:19:"products_extra_text";s:1055:"
- Productspecificaties automatische kippendeur PSD-RH
- Specyfikacje produktów automatyczne drzwi kurnika PSD-RH
- Spécifications du produit le volet automatique pour-volailles PSD-RH
- Descrizione del prodotto PSD-RH
- Popis produktu PSD-RH
";s:11:"products_id";i:531;s:14:"products_price";s:8:"163.8655";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836320";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:13;a:17:{s:14:"products_model";s:8:"HK2AE-RE";s:13:"products_name";s:98:"HK2AE-RE - Frame unit with self-locking duck flap, incl. control for attracting light and lighting";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"532_0.jpg";s:15:"products_weight";s:5:"2.100";s:26:"products_short_description";s:617:"
- separate drive and control unit
- Mains operation 230 V / 12 V DC
- light sensor
- menu-driven display
- self-locking flap 300x450mm for ducks
- solid frame
- emergency stop and emergency opening
- Bait light control
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attracting light
- optional accessories: remote control for light and flap, external button, remote display, light sensor
";s:20:"products_description";s:4776:"automatic ducks flap HK2AE-RE in fixed frame with flap 300x450mm
automatically opens and closes a self-locking flap in a fixed frame at the poultry and ducks house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
If there is an animal under the slider during the closing process, the motor is automatically stopped and the flap is immediately reopened. The closing process is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap, as is usual with all other manufacturers!
integrated Lure light and lighting circuit
Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device. The Lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display. After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically. The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the stable on and off manually.
Self-locking
When closed, the flap in the fixed frame is automatically locked by a bolt on the back of the unit.
No predators such as martens, raccoons etc. can push up this flap when closed.
When the flap is opened, it is automatically unlocked again.
Further options:
- Connection for external pushbuttons available ( for manual OPEN and CLOSE ) If you install the HK2AE-RE indoors, you will need an outdoor light sensor. Can be ordered in the online shop of JOSTechnik!
- The flap is locked when closed and automatically unlocked again when opened. No predator like marten or raccoon can lift or open this flap when closed. The following functions can be set on the integrated display:
- Opening time for morning. The flap opens when it is light and the set opening time has been reached. Both conditions must apply.
- Closing time delay for evening. The flap is closed when it becomes dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
With the optional (additional) FB radio remote control you can operate the HK2 manually and/or switch the lighting on and off with the FB-4T radio remote control.
Mounting:
Fix the HK2AE-RE to the wall above the opening hole using the 4 screws supplied >>> READY !
The control unit can be mounted at any location (fasteners not included) and must be connected to the drive unit on the fixed frame with a 7-core cable (not included, but can be ordered from JOSTechnik).
Scope of delivery without flap/slide:
- automatic ducks flap HK2AE-RE with light sensor and menu-driven display as timer module, cord and flap 300x450mm Dimensions: width fixed frame 330 mm, length 680 mm
+ Control unit ( dimension: 120 x 120 x 55 mm ) without 7-core connection cable ( can be ordered optionally from JOSTechnik )
- Plug-in power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 226
- Fastening material 4 screws and dowels each
Please pay attention to the note on your invoice to download the operating instructions!
";s:19:"products_extra_text";s:1055:"
- Productspecificaties automatische kippendeur PSD-RH
- Specyfikacje produktów automatyczne drzwi kurnika PSD-RH
- Spécifications du produit le volet automatique pour-volailles PSD-RH
- Descrizione del prodotto PSD-RH
- Popis produktu PSD-RH
";s:11:"products_id";i:532;s:14:"products_price";s:8:"172.2689";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836337";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:14;a:17:{s:14:"products_model";s:8:"HK2AE-RB";s:13:"products_name";s:105:"HK2AE-RB - Frame unit with self-locking BIO chicken flap, incl. control for attracting light and lighting";s:17:"products_quantity";i:0;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"534_0.jpg";s:15:"products_weight";s:5:"2.300";s:26:"products_short_description";s:585:"
- Mains operation 230 V / 12 V DC
- light sensor
- menu-driven display
- self-locking flap 420x370mm for organic chickens - husbandry
- solid frame
- emergency stop and emergency opening
- Bait light control
- 12V LED lamps from JOSTechnik can be connected directly
- optional connection module controls dimmable 230 V lighting as so-called attracting light
- optional accessories: remote control for light and flap, external button, remote display, light sensor
";s:20:"products_description";s:4910:"automatic chicken flap HK2AE-RB in fixed frame with BIO-flap 420x370mm
automatically opens and closes a self-locking flap 420x370mm for BIO posture in a fixed frame at the poultry and chicken house, aviary or small animal enclosure at dusk and / or at night.
The drive unit is mounted on the frame and must be connected to the control unit via a 7-core cable (not included in delivery). The motor with shaft and the light sensor are located in the housing of the drive unit.
It is planned to project the HK2AE-RB as a single and frame unit within the scope of a patent application.
If there is an animal under the slider during the closing process, the motor is automatically stopped and the flap is immediately reopened. The closing process is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap, as is usual with all other manufacturers!
integrated Lure light and lighting circuit
Non-dimmable 230 V lighting as so-called lure light or as lighting can be connected and switched using an additional connection module. 12V LED lamps up to 12W can be connected directly to the device. The Lure light is automatically switched on the evening before the flap is closed. The light sensitivity for switching on the light can be adjusted in the menu on the display. After the flap is closed, the lighting duration of the lure light can also be set in the menu to switch it off automatically. The optional (additional) radio remote control FB-4T (with 4 keys) can be used to switch the lighting in the stable on and off manually.
Self-locking
When closed, the flap in the fixed frame is automatically locked by a bolt on the back of the unit.
No predators such as martens, raccoons etc. can push up this flap when closed.
When the flap is opened, it is automatically unlocked again.
Further options:
- Connection for external pushbuttons available ( for manual OPEN and CLOSE ) If you install the HK2AE-RB indoors, you will need an outdoor light sensor. Can be ordered in the online shop of JOSTechnik!
- The flap is locked when closed and automatically unlocked again when opened. No predator like marten or raccoon can lift or open this flap when closed. The following functions can be set on the integrated display:
- Opening time for morning. The flap opens when it is light and the set opening time has been reached. Both conditions must apply.
- Closing time delay for evening. The flap is closed when it becomes dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
With the optional (additional) FB radio remote control you can operate the HK2 manually and/or switch the lighting on and off with the FB-4T radio remote control.
Mounting:
Fix the HK2AE-RB to the wall above the opening hole using the 4 screws supplied >>> READY !
The control unit can be mounted at any location (fasteners not included) and must be connected to the drive unit on the fixed frame with a 7-core cable (not included, but can be ordered from JOSTechnik).
Scope of delivery without flap/slide:
- automatic chicken flap HK2-RB with light sensor and menu-driven display as timer module, cord and flap 370x410mm ( heigh x width ) Dimensions: width fixed frame 440 mm, length 570 mm
+ Control unit ( dimension: 120 x 120 x 55 mm ) without 7-core connection cable ( can be ordered optionally from JOSTechnik )
- Plug-in power supply 230 V / 12 V DC ( Approved for indoor use! )
- Fastening material 4 screws and dowels each
Please pay attention to the note on your invoice to download the operating instructions!
";s:19:"products_extra_text";s:1055:"
- Productspecificaties automatische kippendeur PSD-RH
- Specyfikacje produktów automatyczne drzwi kurnika PSD-RH
- Spécifications du produit le volet automatique pour-volailles PSD-RH
- Descrizione del prodotto PSD-RH
- Popis produktu PSD-RH
";s:11:"products_id";i:534;s:14:"products_price";s:8:"176.4706";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836351";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}}s:1:"e";O:8:"DateTime":3:{s:4:"date";s:26:"2026-08-29 21:02:22.552737";s:13:"timezone_type";i:3;s:8:"timezone";s:13:"Europe/Berlin";}s:1:"g";a:0:{}s:1:"m";N;s:1:"c";N;} 
